Nortel Modular ICS 6.0, Manual

Page: 247 / 294

P0992640 03 Modular ICS 6.0 System Coordinator Guide
Common feature displays
You may see the following displays when you use a feature.
Someone is already using programming,
or the feature you are trying to use is not
compatible with the configuration of the
telephone or line.
You have tried to use a feature, but you
have not been given access to it in
administration programming.
You have taken more than 15 seconds to
press a button in response to a display.
You have entered a feature code that is
used by an application program that your
system does not have.
You have entered an invalid feature code.
You have tried to use a feature that is not
available in the present setup of your
Norstar system.
You cannot use the feature you have
chosen because your telephone is locked.
See
Using Set lock on page 221 .
Press
£
or press
VIEW‚
or
·VIEW t
o view
a number that is too long to fit on the
display. Press
³
or
OK
when you are
finished.
This indicates a long distance call. (May be
available with Call Display services.)
You are receiving an internal call from
telephone 239 forwarded by telephone 221
or you have an Answer button for
telephone 221 and an internal call from
239 is ringing on 221.
You are connected to an internal call.
Press
TRANSFER
to transfer the call.
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
Not available
Set locked
1234567890123...
VIEW
‚
OK
§
239>221
221
TRANSFER