Nortel 703t, Maintenance And Diagnostics

Page: 98 / 248

Using CallPilot Manager to monitor hardware Standard 1.06
98 CallPilot
To run a diagnostic test
1 Run CallPilot Manager and log in.
2 In CallPilot Manager, click Maintenance
➝
Maintenance Admin.
Result: The Maintenance screen appears.
3 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
4 Continue clicking the plus sign (+) until the component with which
you want to work is visible.
5 Click the hardware component for which you want to run
diagnostics.
Result: The Maintenance screen refreshes to show details about
the component.
6 Scroll down to the Maintenance section, and ensure that the
component is out of service.
Note: For instructions on taking the component out of service, see
“To start or stop a component” on page 94.
7 Scroll down to the Diagnostics section.
8 Check the check box for each diagnostic that you want to run.
Note: If you want to run all of the diagnostics, check the Diagnostic
Description check box at the top of the list.
9 Click Run.
Result: A new web browser window opens to display the progress
and results of the diagnostics. The Diagnostic Results box in the
Diagnostics section displays diagnostic results when you click Get
Last Result.
ATTENTION
Nortel recommends that you courtesy stop rather than stop
a component if possible. For instructions, see “Starting and
stopping components” on page 92.