Nortel 703t, Maintenance And Diagnostics, Page: 26 / 248

Troubleshooting your CallPilot system Standard 1.06
26 CallPilot
The server LEDs, from top to bottom and left to right, indicate the status
of the following:
„
the ELAN and CLAN network interfaces
„
hard drive
„
power/sleep
„
system
LEDs are also provided on the SCSI tape drive faceplate, floppy disk
drive faceplate, and the IDE CD-ROM drive faceplate.
Network LED states
The network LEDs are green and are located as follows:
LED
position Controller
name Controller
type LAN
type
Left NIC1 10/100Base-T ELAN
Right NIC2 10/100/1000Base-T CLAN
IF the network
interface LED is
THEN
off a valid hardware connection with the network has
not been established.
Ensure that the Ethernet cable is connected to
both the Ethernet connector on the server and the
respective network hub. If the cable is connected,
ensure that the cable is serviceable.