Nortel 703t, Maintenance And Diagnostics

Page: 29 / 248

January 2007 Troubleshooting your CallPilot system
703t Server Maintenance and Diagnostics 29
Tape drive LED states
The 703t server is equipped with an SLR60 tape drive. Three LEDs are
located on the drive’s front panel. They are referred to as left, center, and
right in the following table:
Table 1: SLR60 LEDs
amber steady
„
a critical temperature or voltage
fault has occurred.
„
the CPU is not installed or is not
functioning.
blinking
„
a power fault has occurred.
„
a fan is faulty.
„
a non-critical temperature or
voltage fault has occurred.
off a fatal error occurred during the
power-on status test (POST).
Left -
Ready
Green Center -
Activity
Green Right -
Error
Amber Description
On On On
„
LED test (2 seconds at power on) is
running.
Blinkin
g Off Off
„
Power-up self-test is running.
„
Diagnostic cartridge activity is
running.
IF the system
status LED is
AND THEN