Nortel 703t, Maintenance And Diagnostics

Page: 97 / 248

January 2007 Using CallPilot Manager to monitor hardware
703t Server Maintenance and Diagnostics 97
Table 13: Diagnostics tests available for components
If a diagnostic test fails or cannot be run
If a warning message appears, the diagnostic test cannot be run because a
prerequisite condition has not been met. If a diagnostic test fails, a
message appears in a new browser window (see the example on page
98).
In both cases, check the Alarm Monitor to determine the reason and the
appropriate action to take.
If the Alarm Monitor and Event Browser do not provide a solution to a
hardware problem, you may need to replace or service a component. If
the problem is with a component that is not replaceable because it is not
a physical entity (such as the Time Switch), you must either replace its
parent component or contact your Nortel technical support
representative, depending on the component.
Component
Diagnostics
available?
Replaceable?
Media Bus No No
MPB board Yes Yes
Time Switch No No
Multimedia Channels No Yes
(via MPB96 board)
DS30X link No No
Channels No No