Nortel 703t, Maintenance And Diagnostics

Page: 174 / 248

RAID operations Standard 1.06
174 CallPilot
To upgrade or downgrade the RAID firmware
The firmware of the RAID card is upgraded through a flash process. The
flash process is initiated by running the RAID card firmware update
utility on the CallPilot CD-ROM.
1 Insert the CallPilot tower 703t Image CD-ROM 1 of 3 into the server
CD-ROM drive.
2 Restart the server and observe the startup diagnostics.
3 When the processor diagnostics screen appears, press Esc.
Result: The following message appears at the bottom of the
screen:
Entering boot selection menu ....
The system continues with the SCSI and RAID startup diagnostics,
and when done, a menu appears.
4 Choose ATAPI CD-ROM, and press Enter.
Result: The Startup menu appears.
5 Choose Utilities (for example, BIOS, Firmware, etc.), and then
press Enter.
Result: A menu appears.
6 Choose LSI Elite 1600 RAID card Firmware update, and press
Enter.
7 Press Y for yes and then Enter to confirm that the 471gen.rom file is
detected.
ATTENTION
Perform this procedure only if the firmware version is
not the version identified in this section.
WARNING
Nortel strongly recommends that you not perform low
level formatting. Performing low level formatting results
in the drives becoming unusable.