Nortel 703t, Maintenance And Diagnostics

Page: 94 / 248

Using CallPilot Manager to monitor hardware Standard 1.06
94 CallPilot
Components that can be started and stopped
The following components can be started and stopped when connected to
a Meridian 1
*
or Succession 1000
*
switch:
Note: If you want to start or stop more than one or two multimedia or
call (DS30X) channels, use the Multimedia Monitor or Channel Monitor.
For instructions, see “Channel and Multimedia Monitors,” on page 84.
To start or stop a component
1 Run CallPilot Manager and login.
2 In CallPilot Manager, click Maintenance
➝
Maintenance Admin.
Result: The Maintenance screen appears.
3 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
Component Effect of stopping
Media Bus Takes all call processing resources out of
service.
MPB board Takes all call processing resources on the
selected board out of service.
Time Switch You cannot perform maintenance administration
on the time switch.
Multimedia Channel Takes the selected Multimedia Channels out of
service.
DS30X link Takes the selected DS30X link and the channels
that belong to that link out of service.
Channels Takes the selected DS30X channel out of
service.