Nomadix Access Gateway, User Manual

Page: 199 / 392

A
CCESS
G
ATEWAY
System Administration 187
1.
From the Web Management Interface, click on
Configuration
, then
Zone Migration .
The
Zone Migration Settings screen appears:
2. Select Relogin after migration to enable the Zone Migration feature.
Add a new Zone
In the
Zone-Based Migration
section, new zones can be added and initially configured, using
the following parameter fields:
 Zone Name
– Allows entry of a name appropriate for the zone to be created. The
name must be unique, cannot exceed 16 characters, and cannot contain characters that
are not alphanumeric, dash, underscore, or space.
 Port-Locations
– This is where the port configuration for the zone is entered. The
data must be entered as a string between 1 and 128 characters in length. The string
must contain either an individual numeric value ("211"), a comma-separated list of
numeric values ("211, 212"), a range of numeric values with dash-separated
delimiters ("211-899"), a list of ranges of numeric values ("211-300, 301-899"), or a
comma-separated list of individual numeric values and ranges ("211, 212, 213-899").

Description – Allows entry of a description for the zone. This must be a string
between 0 and 128 characters in length, and cannot contain characters that are not
alphanumeric, dash, underscore, or space.
In each of these fields, any leading or trailing spaces will be removed by the NSE when the
page is submitted.