A
CCESS
G
ATEWAY
244
System Administration
2.
Define the parameters for your banner(s):
Name/Text
Target URL
Image Name (see following note)
Duration (secs)
Start Time (Optional)
Stop Time (Optional)
3.
If you changed any of the
Image Name
definitions, click on the check box for
Reboot
after changes are saved?
(to reboot the Access Gateway).
4.
When finished, click on the
Submit
button to save your changes, or click on the
Reset
button if you want to reset all the values to their previous state.
5.
To return to the previous screen, click on the
Configure ICC
link.
Pixel Sizes
Use the following parameters when defining images for buttons and banners:
Banners
– 373 pixels (width) x 32 pixels (height)
ISP Button
– 98 pixels (width) x 26 pixels (height)
Small buttons
– 45 pixels (width) x 26 pixels (height)
If you assign (or change) button images or banner images, the Access Gateway
must be rebooted for your changes to take effect.
Summary of Contents for Access Gateway
