Nomadix Access Gateway, User Manual

Page: 276 / 392

A
CCESS
G
ATEWAY
264 System Administration
System Menu
Adding an ARP Table Entry {ARP Add}
ARP (Address Resolution Protocol) is used to dynamically bind a high level IP address to a
low level physical hardware (MAC) address. ARP is limited to a single physical network that
supports hardware broadcasting. This procedure shows you how to add an ARP table entry.
Note: NSE releases 8.2 and later consolidate ARP operations to a single screen. See Adding
and Deleting ARP Table Entries .
1. From the Web Management Interface, click on System , then ARP Add . The Add ARP
Table Entries screen appears:
1.
Enter the
IP Address
of the entry you are adding.
2. Enter the MAC Address of the entry you are adding.
3.
Define whether this entry is:
 Static
– Will only last until the next reboot

Persistent – Will be written to the current.txt file and loaded on each boot of the NSE
4. Define whether the interface that the device the ARP entry is connected to is:

Network – WAN Interface

Subscriber 1 – LAN 1 Interface
 Subscriber 2
– LAN 2 Interface