Nomadix Access Gateway User Manual Download Page 54

Page: 54 / 392

CCESS

ATEWAY

Installing the Access Gateway

Access Gateway on the customer’s network.

Place the AG on a flat and stable work surface and connect the power cord.

Start a HyperTerminal session to communicate with the AG via the serial port.

Power up your computer and turn on the AG.

When prompted, configure your AG’s IP, DNS, and Location

settings. The AG will then prompt you to reboot the system.

Connect the AG to the customer’s network.

Power up the AG and log in via a Telnet session or the Web Management Interface.

Set the basic configuration parameters for subscribers.

Network

Connect the AG to a “live” network. Use the DB9 serial cable (6 ft. length)

between the AG’s serial port and your computer.

Export your configuration settings to an archive file.

The AG is now ready for administrators to add, delete, or

change unique subscriber profiles.

When prompted, accept to the Nomadix End User License Agreement (EULA). You

must accept the EULA before the AG can connect with the Nomadix License Key

Server. When the key is successfully received from the server, your AG will reboot.

You can now power down and connect the AG to the customer’s network.

Summary of Contents for Access Gateway









































































































































































































































































































































































































Search results

Summary of Contents for Access Gateway

Reviews:

Related manuals for Access Gateway

Brands by name

Popular brands

Nomadix Access Gateway, User Manual

Search results

Summary of Contents for Access Gateway

Reviews:

Related manuals for Access Gateway

Brands by name

Popular brands