25
2
FRONT AXLE (DRIVE)
2210154
2210131
: Tightening torque
MG
: Apply molybdenum grease
FB20P-30P
l
Fitting bolts (M20x L65)
l
Fitting bolts (M20x L50)
l
Removing the front axle and traction motor
Traction motor
3 bolts
5 bolts
Front axle
Pay attention to different bolt
lengths, when installing.
CAUTION
Remove the traction motor.
12.
1. Apply wood blocks under the traction motor or front
axle.
2. Remove fitting bolts for both special caps.
3. Move the mast back and remove the front axle from
the mast.
Install the front axle in reverse order of removal.
*
Remove the front axle from the mast as follows.
11.
Bushing
Special cap
Fitting bolt
Fitting bolt
l
Removing the special cap
65mm
65mm
50mm
NOTE
Be careful to not lose the bushings.
Tightening torque
450 - 550 N
m
{46 - 56 kgf
m}
1
Tightening torque
450 - 550 N
m
{46 - 56 kgf
m}
Spline
MG
Apply molybdenum grease on a
part of spline.
Tightening torque
49.5-60.5 N
m
{5.0 - 6.2 kgf
m}
https://www.forkliftpdfmanuals.com/
