133
8
MAST
212E097
1000 mm
0-20 mm
Nut
Nut
l
Adjusting the lift chain
l
Measure the deflection of Lift chains, and adjust it if
out of the specification.
<Adjustment>
1. Tilt the mast vertically.
2. Lower forks on the flat floor.
3. Push the chain at approx. 1000 mm high from the floor
and measure the deflection.
<Specifications>
[mm]
4. If the deflection is out of specification, adjust it with
nuts.
5. After making sure if the deflection of both chain (L.H./
R.H.) is equal, tighten nuts.
Item
Specification
Lift chain deflection
Less than 20 mm
8-3-9. Lift chain - inspection and adjustment
Adjustment of chain deflection
4
1
Adjustment of nut on chain anchor
4
2
l
Adjusting
the nut on chain anchor
Nut (upper)
Nut (lower)
Lock nut
215S0809
1. After adjustment of the chain deflection,
tighten the nut (lower) securely with the lock nut.
2. Tighten the nut (upper) on the anchor by hand, and
then tighten about 1/4 turn by using a tool.
NOTE
This adjustment can reduce the noise at the
anchor.
https://www.forkliftpdfmanuals.com/
