186
CHARGER
10e
Closing battery cover
221W082E
CAN-BUS control
7. When the charge is begun, the display power is turned
on and the charging passage is shown in the indicator.
8. Disconnect the charger plug and AC plug.
9. Shut the battery cover while pushing a yellow part
(resin) in the middle of the gas spring.
10. Fix the bonnet catch surely after shutting the battery
cover.
DANGER
Do not touch any parts of charger and cable by
wet hand.
221W1012
l
Indication of charging passage
W h e n t h e c h a r g e i s c o m p l e t e d , " C H A R G E
COMPLETION" keeps being displayed.
NOTE
l
When the charge is not completed even if 16
hours have passed since it began charging , the
end is displayed as a charge error.
l
If the charge plug is pulled out, the display is
turned off.
Do not place the finger when pushing a yellow
part.
Do not place the finger when closing the battery
cover.
CAUTION
https://www.forkliftpdfmanuals.com/
