134
MAST
8
3. Check for deflection in the chains when lowering forks.
Bolt
Shim
Lock nut
Adjust bolt
Plate, lock
Screw, set
221W026E
l
Adjusting the lift cylinder
M-mast
PFL-mast
P-mast
l
Mast lean
1. Lift forks a little and check if the tension of both lift
chains are the same.
Refer to "8-3-9. Lift chain - inspection and adjustment".
l
Check for the following if the inner mast is inclined
when lifting forks to the top end.
2. Check if both cylinder rods are stopped at the same
time when lifting forks to the top end.
If defects are found, adjust by the following manner.
l
P-mast
:Change numbers or thickness
(t0.2/t0.5/t1.0) of shims.
l
M-mast
:Turn the "Rod, head" to adjust.
Then, tighten the lock nut securely.
l
PFL-mast :Loosen "screw, set" and turn the adjust bolt.
152T033
8-3-10. Mast lean- adjustment
https://www.forkliftpdfmanuals.com/
