11
152E101
Cautions for maintenance
4.
General precautions
152E102
152E103
152E104
l
When replacing any parts, be sure to use genuine
NICHIYU parts.
l
When parts are assembled, always replace old
packing and O-rings with new ones. In addition, be
sure to apply a light coat of grease on the O-rings and
oil seals before installing them.
l
As shown in the illustration, face the flat side of the
C-shape retainer in the direction the force is applied
when installed.
l
As shown in the illustration, face the slit side in the
direction the force is applied when driving in a spring
pin.
l
The split pin must be replaced with a new one and
split so it will not come out.
l
When using a thrust washer with oil grooves cut,
observe the direction of installation.
l
When connecting and disconnecting couplers of
electrical harnesses, always disconnect the battery
plug.
Retainer for a
groove
Retainer for a
hole
Oil grooves
https://www.forkliftpdfmanuals.com/
