98
CYLINDER
7d
Disassembly and reassembly
7d- 2.
Inner mast
Fitting bolt
Piston rod
Outer mast
Fitting bolt
221W020E
P-mast
l
Removing the lift cylinder (1)
Remove fitting bolts for piston rod.
3.
Support the inner mast with a wire rope or wood block.
2.
CAUTION
l
Lift or jack up the forklift truck and support it with safety blocks or
rigid stands.
l
Apply wheel chocks to tyres to prevent the truck from moving.
l
Before disconnecting hydraulic connections, release internal pressure
to prevent from splashing oil.
Refer the CAUTION on the page 4 for the procedure.
l
When disconnecting hydraulic pipes, cap them to prevent dust from
entering into hydraulic components and pipes.
l
Be sure to disconnect the battery plug.
1.
Pull the lift lever backward to raise the inner mast about 50mm.(about 100 mm for forks)
7d-2-1. Lift cylinder - removal : P - mast (2 - stage simplex)
50 mm
https://www.forkliftpdfmanuals.com/
