26
04 - Control System
Main Machine Controller Programming
The Main Machine Controller is programmable for machine specific functions and configurations through
a text menu system. Various parts of the menu system are hidden, depending on the user level access:
User, Supervisor, Technician The User-level access is limited to just reading operational parameters The
Supervisor-level access is permitted to program keys and access the Options menus The Technician-level
(Service Mode) permits access to the whole menu system
Service Mode Access
Placing the machine into Service Mode is required to gain full access to the configuration system. Depending
on the machine type, there are a couple of variations for access Start with the machine powered off
•
If you have a TrackClean technician key, this will provide Service Mode access on any SC6000 machine
by simply holding the key on the key reader and pressing the power button This key is non-magnetic, so
you need to hold it in place until the machine starts up, and then can remove the key
• For a Nilfisk branded machine, place a user or supervisor
SmartKey in the key reader, and then simultaneously press
the Scrub, Vacuum, and Power switches to turn the machine
on in service mode
•
For an Advance branded machine, a SmartKey is not
required Simultaneously press the Scrub, Vacuum, and
Power switches to turn the machine on in service mode
Menu Navigation
The menu system is accessed by pressing the Information switch
(A)
The LCD display will show the text-
based menu system Pressing the Information switch again, exits the menu system Refer to
•
The Up and Down arrows
(B)
scroll through the menu listings. Within a configuration setting, the Up and
Down arrows also scroll through the list of configuration choices.
•
The Cursor arrow
(E)
signifies the current cursor position.
•
The right arrow
(C)
will enter the currently identified submenu. Within a configuration setting, pressing
the right arrow accepts that selection and exits back to the previous menu
•
The left arrow
(D)
backs out of any submenu to the previous menu. Within a configuration setting,
pressing the left arrow cancels the selection, and exits without saving
A
B
C
D
E
