132
40 - Recovery System
Vacuum Motor Brushes
1 Remove the
2 Remove the two screws
(A)
that secure the motor cover
to the motor, and remove the cover
3 Remove the two screws
(C)
that secure the
contact strap
(D)
, and remove the strap
Take care to not bend the wire any more
than necessary
4 Lift the outer end of the brush
(E)
up, and
slide the brush out of the motor housing
5 Repeat for the second brush
E
6 When installing a new brush, tilt the brush
assembly downward at the front so the carbon
bar contacts the commutator bars, and then
compress the spring to fully insert the brush
A
A
B
C
D
E
