73
OPERATING PROCEDURE
:
Photography Mode Other Than Normal Photography Mode
2
4) When the alignment is complete, the auto focus icon appears, then the fundus observa-
tion screen is automatically displayed.
5) When the proper focus to the fundus is achieved with the auto focus, the message “Cap-
turing the image.” appears, then image capture is automatically executed with flash.
5
Check the captured image in the same manner as Step 7 (Page 62) in 2.3 Image Cap-
ture (Normal Photography Mode [Auto shot, No blink]).
6
To save the captured image, press the OK/Auto transfer button
. To not save the
captured image and perform image capture again, press the retry button
.
The same action can be executed by rotating the joystick counterclockwise
or clock-
wise
, then pressing the release button.
1) When the OK/Auto transfer button
is pressed, the captured image is saved in the
USB flash drive, and the review screen is displayed.
2) If the image is dark or too bright when preforming image capture again, adjust the flash
intensity using the flash intensity up/down buttons.
7
When the anterior eye observation screen is displayed, perform image capture with the
next internal fixation lamp in the same manner.
After an internal fixation lamp is used, a check mark is displayed instead of the number.
Example:
to
8
To capture images of the other eye, pull the joystick toward the operator, then move the
image capturing unit horizontally toward the other eye to display the anterior eye obser-
vation screen, then capture images in the same procedure as the above.
9
To perform image capture for the next patient, press the next patient button
to dis-
play the anterior eye observation screen, then perform the procedure from Step 1.
10
When image capture is complete, proceed to “2.4 Image Capture Shutdown Procedure”
(Page 67).
26
#DEF'(IJ
䎔
䎔
䎕
䎖
䎗
䎘
䎙
䎚
• In Panorama photography mode, image capture with the next internal fixation lamp cannot
be performed until the captured image is saved.
䎔
䎔
• In Panorama photography mode, when repeating image capture with previously used
internal fixation lamps, the check mark remains displayed and the number is not displayed,
but the previously used internal fixation lamps illuminate again in the specified order.
