37
BEFORE USE
:
Screen Configuration
1
2. Image capture button
:
Pressing this button after selecting a patient displays the anterior eye observation screen for alignment and
image capture.
3. Patient register button
:
Used to register a new patient. Pressing this button displays the patient information register screen.
4. Patient information edit button
:
Used to edit registered patient information. Pressing this button after selecting a patient displays the patient
information register screen. If the device is connected to a LAN (to NIDEK image filing software, NAVIS-EX),
the button is disabled.
5. Patient information deletion button
:
Depending on the method of pressing the button, it can be selected whether to delete only the selected
patient information or to delete all the patient information.
Clicking (pressing for about 0.5 second or less) deletes only the selected patient information.
Extended pressing (pressing for about 3 seconds) deletes all the patient information in the patient
information register screen.
For details, see “
Deleting patient information” (Page 92).
6. Search condition setting button
:
Used to search the desired patient. Pressing this button displays the search condition setting screen.
• Once any image was captured, past patient data cannot be restored unless the device is
restarted. Pressing the button after image capture displays the message below.
䎧䏄䏗䏄䎃䏆䏄䏑䏑䏒䏗䎃䏅䏈䎃䏕䏈䏗䏕䏌䏈䏙䏈䏇䎃䏄䏉䏗䏈䏕䎃䏆䏄䏓䏗䏘䏕䏌䏑䏊䎃䏄䏑
䏌䏐䏄䏊䏈䎑
䎳䏏䏈䏄䏖䏈䎃䏕䏈䏖䏗䏄䏕䏗䎃䏗䏋䏈䎃䏇䏈䏙䏌䏆䏈䎃䏄䏑䏇䎃䏗䏋䏈䏑䎃䏕䏈䏗䏕䏌䏈䏙䏈
䏗䏋䏈䎃䏇䏄䏗䏄䎑
Extended pressing of the patient information
deletion button
Clicking of the patient information deletion button
