manualshive.com logo in svg

Nidek Medical AFC-330, Operator'S Manual

Share
Download
Nidek Medical AFC-330 Operator'S Manual Download Page 181

165

6

6.

EMC 

(ELECTROMAGNETIC COMPATIBILITY)

6.1

EMC (Electromagnetic Compatibility)

The device complies with the International Electrotechnical Commission standards (IEC 60601-1-2:
2007) for electromagnetic compatibility.

O Specified cable

O Essential performance

Fundus image capture function

WARNING

• Use the specified accessories, optional accessories, and cables.

Otherwise increased emissions or decreased immunity of the device may result.

• Do not use the device near, on, or under other electronic equipment.

CAUTION

• The device needs special precautions regarding EMC.

The device needs to be installed and used in accordance with the EMC information provided in this
manual.

• Portable and mobile RF communications equipment can affect the device.

Part name

Connector Shielded

Cable Shielded

Ferrite Core

Length (m)

Power cable

-

No

No

2.5

LAN cable

Yes

Yes

Yes

5.0

external fixation lamp

No

Yes

No

0.35

USB extension cable

Yes

Yes

No

0.10

Summary of Contents for AFC-330



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands