95
OPERATING PROCEDURE
:
Registering, editing, and searching patient information
2
<When the device is LAN-connected to FILE or a USB flash drive is connected>
Patient information registered in the database within the device can be viewed.
1
Perform Steps 1 to 3 of
<When the device is connected with NAVIS-EX>
in the previ-
ous page.
2
Press the Retrieve button.
When the patient data with the input patient
ID exists
The patient information is input.
The retrieved patient information can be
edited.
However, when “CSV File” setting is ON,
patient information cannot be edited.
When the patient data with the input patient ID does not exist
The same message as Step 4 of
<When the device is connected with NAVIS-EX>
appears.
Pressing the message screen displays the new patient register screen.
* To capture images with a registered input patient ID, continue inputting other patient information
items, then press the release button.
Searching patient information
This section explains the method of searching registered patient information.
There are three methods to search, and all of them are executed in the patient information register screen.
Using these search methods, the patient information can be searched as shown below.
Example 1
Step1: Searching information such as medical history and sex using the search condition setting but-
ton
Step2: Narrowing the search to the current day using the captured patient list search button
Example 2
Step1: Rough search using the quick search button
Step2: Narrowing the search to the current day using the captured patient list search button
Editable items
