46
BEFORE USE
:
Device and Software Setup
1.8
Device and Software Setup
Install the device in a place in accordance with the precautions in “Before Use”.
The procedure below is explained with a USB flash drive connected to the device, which is the default
setting for the device.
When using the USB flash drive, observe the instructions in “3.1 Connection of USB devices” (Page 139).
When using the device in connection with the PC through a LAN, also see “3.2 Connection of PC” (Page 144).
1
Install the device on a stable place.
2
Attach the cap holder according to the procedure below.
1)
Tie the straps on the cap holder and the
objective lens cap as shown to the right.
[1]
[2]
[3]
[4]
[5]
Strap
Cap holder
Objective lens cap
