NF BP4620, Instruction Manual

Page: 94 / 214

4.5 Sequence Operation
BP4620
4-47
The operation procedure is described below.

Operation procedure via operation panel
<1> Open the PROGRAM screen.
For how to open the PROGRAM screen,
refer to “4.5.2 Setting of sequence”
.
<Step 1 setting>
<2> Press the key to move the cursor to [DC VOLT].
ENTER CANCEL
<3> Press the
ENTER
key to display the Modify box.
ENTER CANCEL
<4> Press the and
keys to move the cursor to the third item from the left and then turn
the [MODIFY] dial to set “2”. Next, move the cursor to the fourth item from the left and turn
the [MODIFY] dial to set “5” (thus setting “2.5 V”).
<5> Press the
ENTER
key to apply the set value.