NF BP4620, Instruction Manual

Page: 107 / 214

4.8 Remote Control
BP4620
4-60
<4> Press the
ENTER
key to display the Select box.
ENTER CANCEL
<5> Press the and keys to move the cursor to “USB488“for USB488 interface or
“USBTMC” for USBTMC interface.
ENTER CANCEL
<6> Press the
ENTER
key to apply the setting, or press the
CANCEL
key to cancel the setting.
Restart the product when you change USB interface.
-------- Comment -----------------------------------------------------------------------------------------------------------
 Switching USB interface is not valid until you restart the product. Restart the product when
you switch USB interface.
---------------------------------------------------------------------------------------------------------------------------------
4.8.2 USB ID
Used for a system connected with BP4620 through USB, to enable the application identify each source.
4.8.2.1 USBTMC
If you are using USBTMC, USB ID has been assigned to each instrument. It can be checked in
“REMOTE” screen.

Operation procedure
<1> Press the and keys to move the cursor to the icon.