NF BP4620, Instruction Manual

Page: 200 / 214

8.18 Safety, EMC and RoHS
BP4620
8-13
8.18 Safety, EMC and RoHS
(Only models with a CE marking on the rear panel.)

Safety
Compliant with the following standard requirement.
EN 61010-1

EMC
Compliant with the following standard requirement.
EN 61326-1 (Group 1, Class A)
EN 61000-3-3
When in an environment having strong radio frequency electromagnetic fields (EMFs), note with
caution that output current gauge readings may become temporarily incorrect or the output may
be cut off due to an incorrect overload reading.
This product may cause interference if used in residential areas. Such use must be avoided unless
the user takes special measures to reduce electromagnetic emissions to prevent interference to the
reception of radio and television broadcasts.

RoHS
Compliant with the following.
Directive 2011/65/EU
For compliance of products, please contact us or our agency.
8.19 Output Voltage and Output Current Supply Ranges
The supply range differs depending on the positive and negative output voltage limiter settings (+Vo
limit,

Vo limit).
The DC output range figures ( Figures 8-2 to 8-5 ) show the relationship between the outputtable
voltage and current for DC. These figures also show the outputtable ranges for the voltage and
current including DC offset for AC of 500 Hz and lower.
The AC output range figures (
Figures 8-6 to 8-9 ) show the relationship between the outputtable DC
voltage and peak current. However, the maximum time interval during which the peak current can be
output is 4 ms.
All values in these figures are for reference only.