NF BP4620, Instruction Manual

Page: 110 / 214

4.8 Remote Control
BP4620
4-63
ENTER CANCEL
<4> Press the
ENTER
key to display the modify button.
ENTER CANCEL
<5> Press the and keys to move the cursor to the digit to be changed and turn the
[MODIFY] dial to set the desired value.
<6> Once all the digits have been set, press the
ENTER
key to set the USB ID. Or, to cancel the
setting and leave the USB ID unchanged, press the
CANCEL
.
4.8.3 Switch to local mode
Switching from the remote mode to the local mode can be done in the following three ways.

Transmission of interface message GTL

Operation via shortcut keys

Operation via menu
The operation procedures are described below.

Operation procedure (operation via shortcut keys)
Press the [LOCAL] shortcut key to switch to the local mode.
SEQUENCE
STOP START MAIN LOCAL HOLD