88
USRCAL_n
User Calibration Enable
Syntax:
USRCAL_n <state>
where n is either A or B
Parameters:
The parameter <state> is a <number> which can be 0 or 1. If the number is 0,
then user calibration is disabled. If the number is 1, then user calibration is
enabled.
Function:
This command enables or disables the use of a user defined calibration point.
Related Commands:
ATTN_n, ATTN_n?, LAMBDA_n, LAMBDA_n?, RESP_n?,
USRCAL_n?, USRRESP_n, USRRESP_n?
USRCAL_n?
User Calibration Enable Query
Syntax:
USRCAL_n?
where n is either A or B
Parameters:
None
Function:
This query returns a value showing whether or not user calibration is enabled
or disabled.
Returns:
<state>
<state> is of type <number> and represents an integer 0, if user calibration is
disabled, or 1, if user calibration is enabled.
Related Commands:
ATTN_n, ATTN_n?, LAMBDA_n, ,LAMBDA_n?, RESP_n?,
USRCAL_n, USRRESP_n, USRRESP_n?
USRREF_n
User Defined Reference Value Select
Syntax:
USRREF_n <val>
where n is either A or B
Parameters:
The parameter <val> is of type <number>.
Function:
This command provides a means of directly storing a reference value to be
used in linear and logarithmic (dB) relative measurements. The units of this
value are watts for Low Power and High Power detectors and joules for Energy
detectors.
Related Commands:
REFSEL_n, REFSEL_n?, STOREF_n, USRREF_n?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
