manualshive.com logo in svg

NewMar Canyon Star 2021, Owner'S Manual

The NewMar Canyon Star 2021 is a top-of-the-line recreational vehicle that offers unmatched luxury and convenience for all your adventures. You can enhance your journey by downloading the comprehensive Owner's Manual for free, providing you with essential information and guidance. Visit manualshive.com to effortlessly access and download this invaluable manual today.

Share
Download
background image

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.

17

SAFETY

This silence feature can temporarily quiet the low battery 

warning “chirp” for up to 8 hours. You can silence the 

low battery warning “chirp” by pressing the Test/Silence 

button. The horn will chirp, acknowledging that the low 

battery silence feature has been activated.
After 8 hours, the low battery “chirp” will resume. Replace 

the battery as soon as possible; this unit will not operate 

without battery power!
To deactivate this feature: Press the Test/Silence button 

again. The unit will go into Test Mode and the low battery 

warning will resume (LED flashes and unit sounds “chirp” 

once a minute.)
If you cannot silence the low battery warning, replace the 

battery immediately.

SILENCING THE LOW BATTERY 
WARNING

• 

IF the CO alarm is silent for only 4 minutes, then 

starts sounding loudly - 4 beeps, pause, 4 beeps, 

pause... THEN the CO levels are still potentially 

dangerous.

• 

IF the CO alarm remains silent after you pressed 

the Test/Silence button... THEN the CO levels are 

dropping.

This silence feature can temporarily quiet the End of Life 

warning “chirp” for up to 2 days. You can silence the 

End of Life warning “chirp” by pressing the Test/Silence 

button. The horn will chirp, acknowledging that the End of 

Life silence feature has been activated.

SILENCING THE END OF LIFE SIGNAL

• 

After approximately 2 days, the End of Life “chirp” 

will resume.

• 

After approximately 2-3 weeks the End of Life 

warning cannot be silenced.

The Silence Feature is intended to temporarily silence 

your CO Alarm’s alarm horn while you correct the 

problem—it will not correct a CO problem. While the alarm 

is silenced it will continue to monitor the air for CO.
When CO reaches alarm levels the alarm will sound— 

repeating horn pattern: 4 beeps, a pause, 4 beeps, etc. 

Press and hold the Test/Silence button until the horn is 

silent. The initial Silence cycle will last approximately 4 

minutes.
NOTE: After initial 4-minute Silence cycle, the CO Alarm 

re-evaluates present CO levels and responds accordingly. 

If CO levels remain potentially dangerous —or start rising 

higher—the horn will start sounding again.

Using The Silence Feature

WARNING

!

The Silence Feature is for your convenience only 

and will not correct a CO problem. Always check 

your home for a potential problem after any alarm. 

Failure to do so can result in injury or death.

WARNING

!

NEVER remove the batteries from your CO Alarm 

to silence the horn. Use the silence feature. 

Removing the batteries removes your protection!

WHEN THE DETECTOR IS SILENCED:

WEEKLY TESTING

Testing and Maintenance

WARNING

!

Test the CO Alarm once a week. If the CO Alarm ever 

fails to test correctly, have it replaced immediately! If 

the CO Alarm is not working properly, it cannot alert 

you to a problem.

WARNING

!

DO NOT try fixing the Alarm yourself - this will void 

your warranty! Install a new CO Alarm immediately.

WARNING

!

Do NOT stand close to the Alarm when the horn is 

sounding. Exposure at close range may be harmful 

to your hearing. When testing, step away when horn 

starts sounding.

WARNING

!

The Test/Silence button is the only proper way to 

test the CO Alarm. NEVER use vehicle exhaust! 

Exhaust may cause permanent damage and voids 

your warranty.

Push and hold the Test/Silence button on the cover until 

the LED flashes. The alarm horn will sound 4 beeps, a 

pause, then 4 beeps. Th ALARM (RED) light will flash.
The alarm sequence should last 5-6 seconds. If it does 

not alarm, make sure fresh batteries are correctly 

installed, and test it again. If the unit still does not alarm, 

replace it immediately.

IF THE ALARM DOES NOT TEST PROPERLY:

1.  Make sure the battery is installed correctly.
2. Be sure the Alarm is clean and dust-free.
3.  Install a fresh 9V battery and test the Alarm again.

Summary of Contents for Canyon Star 2021



















































































































































































































Reviews:

No comments

Related manuals for Canyon Star 2021

hymer Roadtrek 210 Popular 2017 Owner'S Manual preview
Roadtrek 210 Popular 2017
Brand: hymer Pages: 67
Autohomes 1994 Avalon Owner'S Handbook Manual preview
1994 Avalon
Brand: Autohomes Pages: 53
Four Wheel HAWK Owner'S Manual preview
HAWK
Brand: Four Wheel Pages: 15
Bluebird 1984 WANDERLODGE Owner'S Manual preview
1984 WANDERLODGE
Brand: Bluebird Pages: 119
Easy Caravanning TakeOff Active User Manual preview
TakeOff Active
Brand: Easy Caravanning Pages: 36
Jayco REDHAWK 2023 Owner'S Manual preview
REDHAWK 2023
Brand: Jayco Pages: 141
Fleetwood Southwind 1982 Owner'S Manual preview
Southwind 1982
Brand: Fleetwood Pages: 42
Fleetwood Southwind 1979 Owner'S Manual preview
Southwind 1979
Brand: Fleetwood Pages: 48
Sterling ECCLES Amber Owner'S Service Handbook preview
ECCLES Amber
Brand: Sterling Pages: 19
Sterling 2004 Eccles Amber Warranty & Service Handbook preview
2004 Eccles Amber
Brand: Sterling Pages: 20

Brands by name

Popular brands

Load more brands