NewMar Canyon Star 2021 Owner'S Manual Download

Page: 17 / 210

SAFETY

LAP/SHOULDER COMBINATION
RESTRAINTS

LAP BELT RESTRAINTS WITHOUT A
SHOULDER HARNESS

Enter the vehicle and close the door. Sit back, and

adjust the seat.

The latch plate of the belt is above the back of your

seat. Grasp the latch plate, and pull out the belt. Slide

the latch plate up the webbing as far as necessary to

make the belt go around your lap.

When the belt is long enough to fit, insert the latch

plate into the buckle until you hear a “click.”

Position the lap belt across your thigh, below your

abdomen. If you need the lap portion tighter, pull up

a bit on the shoulder part. A snug belt reduces the

risk of sliding under the belt in a collision. Position the

shoulder belt on your chest so that it is comfortable

and not resting on your neck. The retractor will

withdraw any slack in the belt.

To release the belt, push the release button on the

buckle.

Slide the latch up the webbing as far as necessary to

make the belt go around your lap.

Insert the latch plate into the buckle until you hear a

“click.”

Adjust and position the belt low and snug across your

hips by removing the slack from the belt.

To release the belt, push the release button on the

buckle.

There are di

erent sizes and types of restraints for children

from newborn to near-adult size children. Use the restraint

that is correct for your child:

•

The restraint must be appropriate for your child’s

weight and height. Check the label on the restraint for

this, too.

•

Carefully follow the instructions that come with the

restraint. If you install the restraint improperly, it may

not work when you need it.

•

Buckle the child into the restraint exactly as the

manufacturer’s instructions have directed.

Always wear your seat belt when the vehicle is in

operation.

WARNING

Each belt is intended to restrain only one person at a

time. Do not put two people under one belt.

IMPORTANT

Seat belts are matched sets. Do not mix or use this

belt or parts of this belt with other types of seat belts.

IMPORTANT

Everyone in your vehicle needs to be buckled up

at all times. Every state in the United States and all

Canadian provinces require that small children ride in

proper restraint systems. This is the law, and you can

be prosecuted for ignoring it.

IMPORTANT

Some shoulder belts can be adjusted upward or

downward to help position the belt away from your

neck. Push on the anchorage cover to release it, and

then move it up or down to the position that serves

you best.

NOTICE

Never attempt to restrain a child in your lap using the

lap belt around both you and the child. The child could

be severely injured or killed in the event of a collision.

CAUTION

WARNING

A frayed or torn belt could rip apart in a collision

and leave you with no protection. Inspect the

belt system periodically, checking for cuts, frays,

or loose parts. Damaged parts must be replaced

immediately. Do not disassemble or modify the

system. Seat belt assemblies must be replaced

after an accident if they have been damaged (bent

retractor, torn webbing, etc.)

Periodically examine your restraint equipment to be

sure it functions correctly and to be sure there are no

worn or broken components that either needs repair

or replacement. Damaged parts must be replaced

immediately. Do not disassemble or modify the system.

How To Maintain Your Seat
Belts and Restraint System

Summary of Contents for Canyon Star 2021



















































































































































































































Search results

Summary of Contents for Canyon Star 2021

Reviews:

Related manuals for Canyon Star 2021

Brands by name

Popular brands

NewMar Canyon Star 2021, Owner'S Manual

Search results

Summary of Contents for Canyon Star 2021

Reviews:

Related manuals for Canyon Star 2021

Brands by name

Popular brands