manualshive.com logo in svg

NewMar Canyon Star 2021, Owner'S Manual

Share
Download
NewMar Canyon Star 2021 Owner'S Manual Download Page 173

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.

168

PLUMBING

CLOSING THE ACCESS DOOR

1.  If removed, insert the access 

door into the cover plate.

2. Make sure that the webbing 

is not pinched between the 

access door and the cover 

plate.

3.  Press the access door against the cover plate.
4.  Turn the turn lock clockwise into the horizontal 

position.

Damage to the access door and the RV if the access 

door is not closed properly! Make sure that the access 

door is flush with the cover plate when closed.

NOTICE

!

Inspections Before Each Use

Check the appliance for the following points before each 

use. In case of damage, contact an authorized Truma 

service provider and do not operate the appliance.

1.  Check for visible damage, e.g., on the cover plate or 

access door.

2. Provide adequate quantities of propane gas and fresh 

water.

3.  Switch ON and check 12 V power supply of your RV.
4.  Check that the access door of the appliance is closed.
5. Keep the appliance free of foreign objects, e.g., 

leaves, animals, spiderwebs, and keep the area 

around free of snow and ice. The appliance will not 

function properly if the intake air or exhaust terminal 

is obstructed.

Operating Procedures

WARNING

!

Danger of over-temperature and toxic exhaust 

gases! Use with LP gas (propane) only. Butane or any 

mixtures containing more than 10 % butane must not 

be used. Keep the air inlet and exhaust gas outlet 

free of obstructions. Do not lean any objects against 

the water heater’s access door or place any foreign 

objects within 2 feet (61 cm) of the access door.

WARNING

!

Danger of combustion, personal injury and damage 

to RV! Keep the area around the appliance free from 

combustible materials, gasoline, and other flammable 

vapors or liquids. Switch the gas supply and the 

appliance o

ff

: if anything seems to be out of the 

ordinary, if you smell gas, if you move the RV, before 

entering a gas station, before entering a tunnel.

Proceed as follows to fill the appliance with water:

1.  Close open bypass lines (if present). Insert the water 

inlet filter or heating cartridge – if removed. 2, 7, 9 – 11.

2. Turn on fresh water supply or switch on water pump.
3.  Fill the plumbing system.

• 

Open all water-release points, e.g., cold and hot 

water faucets, showers, toilets.

• 

It is important that you bleed the water system 

before starting the appliance.

• 

Once water flows, the plumbing system is vented. 

Close the water-release points.

4.  Start the appliance as follows:

• 

Make sure that the LP gas supply is turned on.

• 

Switch on the 12 V power supply (RV).

• 

Open the access door.

• 

Switch on the appliance at the POWER switch.

5. AquaGo Comfort / AquaGo Comfort plus:

• 

Select the desired operating mode.

• 

Close the access door.

Risk of damage in frost conditions. In frost conditions, 

ambient temperatures below 39 °F (4 °C), there is a 

risk that water in pipes, faucets and appliances could 

freeze. This can cause considerable damage. Before 

you fill water into appliances and parts that transport 

water, you must heat the installation area su

ffi

ciently 

so that the water cannot freeze.

NOTICE

!

• 

There may be a variation between the temperature 

delivered from the appliance and the temperature 

at the faucet due to water conditions or the length 

of pipe from the appliance.

• 

The presence of a flow restrictor in the hot water 

line may Iimit the water flow.

How to use hot water:

• 

To obtain the desired water temperature at the 

faucet or in the shower, mix cold and hot water.

• 

Particularly when showering, wait until the water 

temperature has stabilized before entering or 

allowing other people or animals to enter the 

shower.

WARNING

!

Scalding injuries caused by hot water! Water 

temperatures over 127ºF (52ºC) can cause severe 

burns or scalding and in extreme cases even 

death. Before using the hot water faucet or using 

the shower, allow the hot water to run until the 

water temperature no longer increases. Test the 

temperature of the water before placing a child in 

the bath or shower. Do not leave a child or an infirm 

person in the bath unsupervised.

Summary of Contents for Canyon Star 2021



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands