NewMar Canyon Star 2021 Owner'S Manual Download Page 112

Page: 112 / 210

107

ENTERTAINMENT SYSTEMS

Maintenance

The RoadTrip® P4 antenna is designed to be

maintenance free. However, it is a good idea to clean

the dome from time to time with a soft cloth, water, and

dish soap.

Source(s): Winegard RoadTrip P4 Automatic Stationary Roof-Mounted

Satellite TV Antenna

Product(s): Winegard RoadTrip Automatic Stationary Roof-Mounted

Satellite TV Antenna (Model: RTS-20B, Newmar Part Number: 135607)

DirecTV®

The RoadTrip® P4 antenna switch settings are preset for

DIRECTV. If you have a DISH or Bell TV receiver, you must

change the numbered switches found on the electronics

box under the dome.

RECEIVER SETUP

Connect the receiver to a power source, and complete

receiver setup. Check out online receiver setup guides for

your antenna at www.winegard.com/support.

RECEIVER RECOMMENDATIONS

The RoadTrip® P4 antenna will operate with most

DIRECTV receivers. Winegard does not recommend

using receivers with hard drives, as they are not intended

for mobile applications. Winegard does not recommend

using an HD receiver since HD programming will not be

available. SWM only receivers require a SWM-840 kit.

SATELLITE COVERAGE

The antenna will locate and toggle between satellites 101°

and 119°. The RoadTrip® P4 antenna will not operate in all

areas where satellites 101° and 119° are available. The P4

antenna is not compatible with 110° or KA-band satellites

99° and 103°. Satellite coverage maps are based on level,

stationary operation. Reception interruption may also

occur during adverse weather conditions.

Winegard Trav’ler Automatic Multi-Satellite TV Antenna
Operation (Models: SK-773, SKM-100, SWM-300)

This article provides basic operation instructions for a Winegard Trav’ler Automatic Multi-Satellite TV Antenna (Models:

SK-773, SKM-100, SWM-300).

Operation

The TRAV’LER antenna o

ers a simple one-button

operation. Simply press “POWER,” and the antenna

will automatically begin searching for satellites. The

instructions assume that the antenna is already in the

stowed position.

1. Press and hold “POWER” for two seconds or until the

TRAV’LER interface displays “POWER ON.”

2. Once the unit has been powered on, release

“POWER.”

3. The interface screen will display the type of satellite

dish on the top line.

4. The TRAV’LER antenna will enter the search mode

as part of its normal operation and will display

“Searching” on the bottom line.

5. The antenna will find its home position and begin

to look for a satellite. Upon finding a satellite, the

antenna will fine-tune or “peak” on the signal.

6. In automatic search mode, the TRAV’LER antenna

will lock onto multiple di

erent satellites. The

antenna will display an asterisk for each satellite

found.

TIP: If you want to turn o

the power to the TRAV’LER

antenna after the antenna has locked onto satellites,

press “POWER” and “SELECT” at the same time. Before

traveling, make sure to press “POWER” and wait for the

antenna to start to power up; then press “POWER” again

to initiate the stow sequence.

TRAV’LER SK-SWM3 SATELLITE
ANTENNA

•

DIRECTV Satellites: 99°, 101°, 103°

•

Views 3 Satellites Simultaneously

TRAV’LER SK-1000 SATELLITE
ANTENNA

•

DISH Satellites: 110°, 119°, 129° (61.5° Manual Only)

•

Views 3 Satellites Simultaneously

•

Bell TV Satellites: 82°, 91°

Summary of Contents for Canyon Star 2021



















































































































































































































Search results

Summary of Contents for Canyon Star 2021

Reviews:

Related manuals for Canyon Star 2021

Brands by name

Popular brands

NewMar Canyon Star 2021, Owner'S Manual

Search results

Summary of Contents for Canyon Star 2021

Reviews:

Related manuals for Canyon Star 2021

Brands by name

Popular brands