© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
151
INTERIOR
Operation
The bed(s) is/are operated from the control switch.
Pressing and holding the switch in the UP position moves
the bed(s) upward. Pressing and holding the switch in the
DOWN position, moves the bed(s) downward.
Limit switches are used to stop the bed(s) at their
maximum travel range. However, the bed(s) can be
stopped and used at any desired height. Once the control
switch is released, the brake sets securing the bed(s) in
that position.
STOWING THE TOP BUNK
The bed lift system has a stow feature for the top bunk
which leaves it in the travel position at the ceiling while
allowing the lower bunk to be set at a usable height.
Stowing of the top bunk allows the sofa seating to be
used or the lower bed to be used without the top bunk.
Maintenance
The only required maintenance involves keeping the
mechanism clean and free of debris. When cleaning the
trailer after use, inspect the vertical trolley channels for
dirt or debris and clean as necessary. After cleaning, a
light application of silicone spray on the inner sides of the
trolley channels will improve performance and reduce
noise and amperage draw.
TO STOW
1. Run the beds to the FULL UP stop.
2. Insert the locking pins through the trolley rails.
3. Lower bottom bunk to desired height.
TO UN-STOW
1. Run the beds to the FULL UP stop.
2. Remove the locking pins.
3. Lower both bunks until the top bunk rests on the
bunk stop and the lower bunk is at desired height.
Safety Precautions
Coaches equipped with bunk beds may have labels
adhered to a surrounding area to provide special
instructions or weight capacities. Acknowledge and follow
all warning labels to prevent any damage to equipment
or personal injury. The following labels are examples only.
Actual instructions and weight restrictions may vary.
WARNING
!
On coaches equipped with a flip-down bunk or bunk
bed lifts, NEVER operate the bed(s) with person(s)
or object(s) on the bed platform or travel with any
object(s) other than bedding on the beds.
CAUTION
!
Ensure that the areas above, below and adjacent to
the bed(s) are free from obstructions before operating
the bed(s). Properly secure loads in the bed area to
avoid damage to the bed mechanism from shifting or
falling loads.
Raise the bed(s) to the FULL UP position when the
trailer is being towed TO AVOID DAMAGE TO THE
BED(s) as a result of bouncing.
IMPORTANT
!
Source(s): HappiJac PNP Bed-Lift Users Manual and Troubleshooting Guide
Product(s): This source is associated with more than one product. Refer to
Newgle for more information about the product(s) o
ff
ered for your coach’s
model year.
This article provides an overview of the HappiJac Electric Lift Bunk Bed installed in some coaches equipped with a garage.
The HappiJac Power Bed Lift e
ff
ectively maximizes existing vertical space, providing room for additional storage or
sleeping/sitting area.
HappiJac Electric Lift Bunk Bed Operation
Summary of Contents for Canyon Star 2021
Page 1: ...2021 sm ...