Newland NLS-HR42, User Manual

Page: 47 / 265

33
Smart Stand Mode
After this feature is turned on, the scanner will switch from its current scan mode to the Sense mode when it is inserted in
the stand, and it will operate in its previous scan mode when it is removed from the stand.
@SMTENA0
Off
@SMTENA1
** On
Read Barcode On/Off
Sending the Read Barcode Off command ~<SOH>0000#SCNENA0;<ETX> to the scanner can disable it from reading
barcode, and the scanner is unable to scan barcode unless you send the Read Barcode On command
~<SOH>0000#SCNENA1;<ETX> to it or power cycle it. By default, Read Barcode is On.
Decode Area
Whole Area Decoding: The scanner attempts to decode barcode(s) within its field of view, from the center to the
periphery, and transmits the barcode that has been first decoded.
Specific Area Decoding: The scanner attempts to read barcode(s) within a specified decoding area and transmits the
barcode that has been first decoded. This option allows the scanner to narrow its field of view to make sure it reads only
those barcodes intended by the user. For instance, if multiple barcodes are placed closely together, specific area decoding
in conjunction with appropriate pre-defined decoding area will insure that only the desired barcode is read.
Acuread Decoding: The scanner only decodes the barcode aimed squarely by the aiming pattern. For those using a
crosshair aiming pattern, only the barcode aimed by the center of crosshair will be decoded.