Newland NLS-HR42, User Manual

Page: 40 / 265

26
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is programmable in 1ms
increments from 1ms to 3,600,000ms. When it is set to 0, the timeout is infinite. The default setting is 3,000ms.
@ORTSET
Decode Session Timeout
Set the decode session timeout to 1,500ms:
1. Scan the Decode Session Timeout barcode.
2.
Scan the numeric barcodes “1”, “5”, “0” and “0” from the “Digit Barcodes” section in Appendix.
3. Scan the Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
Timeout between Decodes
Timeout between Decodes sets the time period between the end of one decode session and the start of next session. It is
programmable in 1ms increments from 1ms to 10,000ms. The default timeout is 500ms. This feature is only applicable to
the Continuous modes.
@SCNINV
Timeout between Decodes
Set the timeout between decodes to 800ms:
1. Scan the Timeout between Decodes barcode.
2. Scan the numeric barcodes
“8”, “0” and “0” from the “Digit Barcodes” section in Appendix.
3. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.