Newland NLS-HR42, User Manual

Page: 15 / 265

1
Preface
Introduction
This manual provides detailed instructions for setting up and using the NLS-HR42 2D handheld barcode scanner
(hereinafter referred to as
“the HR42”
or
“the scanner”
).
Chapter Description

Chapter 1 Getting Started : Gives a general description of the HR42.

Chapter 2 EasySetEX : Introduces a useful tool you can use to set up the HR42.

Chapter 3 System Settings : Introduces three configuration methods and describes how to configure
general parameters of the HR42.

Chapter 4 RS-232 Interface : Describes how to configure RS-232 communication parameters.

Chapter 5 USB Interface : Describes how to configure USB communication parameters.

Chapter 6, Symbologies : Lists all compatible symbologies and describes how to configure the relevant
parameters.

Chapter 7 Data Formatter : Explains how to customize scanned data with the data formatter.

Chapter 8 Prefix & Suffix : Describes how to use prefix and suffix to customize scanned data.

Chapter 9 Batch Programming : Explains how to integrate a complex programming task into a single barcode.

Appendix : Provides factory defaults table and a bunch of frequently used programming
barcodes.