Newland NLS-HR42, User Manual

Page: 149 / 265

135
Set Length Range for Industrial 25
The scanner can be configured to only decode Industrial 25 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
@L25MIN
Set the Minimum Length (Default: 6)
@L25MAX
Set the Maximum Length (Default: 48)
If minimum length is set to be greater than maximum length, the scanner only decodes Industrial 25
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only Industrial 25 barcodes with that length are to be decoded.
Set the scanner to decode Industrial 25 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2.
Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
3. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.
4. Scan the Set the Maximum Length barcode.
5. Scan the numeric barcodes
“1” and “2” from the “Digit Barcodes” section in Appendix.
6. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.