Newland NLS-HR42, User Manual

Page: 238 / 265

224
Terminating Character Suffix
Enable/Disable Terminating Character Suffix
A terminating character such as carriage return (CR) or carriage return/line feed pair (CRLF) can only be used to mark the
end of data, which means nothing can be added after it.
@TSUENA0
Disable Terminating Character Suffix
@TSUENA1
** Enable Terminating Character Suffix
Set Terminating Character Suffix
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode then the numeric barcodes
corresponding to the hexadecimal value of a desired terminating character then the Save barcode.
Note: A terminating character suffix cannot exceed 2 characters.
@TSUSET
Set Terminating Character Suffix
@TSUSET0D
** Terminating Character CR (0x0D)
@TSUSET0D0A
Terminating Character CRLF (0x0D,0x0A)
Set the terminating character suffix to 0x0A:
1. Scan the Set Terminating Character Suffix barcode.
2. Scan the numeric barcodes
“0” and “A” from the “Digit Barcodes” section in Appendix.
3. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.