Newland NLS-HR42, User Manual

Page: 3 / 265

Revision History
Version Description Date
V1.0.0 Initial release. September 6, 2017
V1.0.1
Added Chapter 9 Batch Programming .
Note: Firmware version V1.00.011 or later is required for the new feature above.
November 9, 2017
V1.1.0
1. Added the Number of Good Read Beeps , Good Read Beep Interval Time ,
Good Read Delay , Read Barcode On/Off , Aimed Barcode Decoding and
Smart Stand Mode
features, and deleted the “Specific Area Decoding” section
in Chapter 3.
2. Modified the “USB Country Keyboard Types”, “Emulate Alt+Keypad”, “Function
Key Mapping” sections; added code pages 1253-1258 and
Polling Rate
features; deleted the USB DataPipe and USB COM Port Emulation features
in Chapter 5.
3. Added the Enhance Poor Quality 1D Barcode Decoding EAN-8/ EAN-13/
UPC-E/ UPC-A Add-On Code Required & Add-On Code Separator , Enable /
Disable UPC-E0 / UPC-E1 and Transmit UCC/EAN-128 Check Character
features in Chapter 6.
4. Modified Chapter 7.
Note: Firmware version V1.00.013 or later is required for the new feature above.
January 25, 2018
V1.1.1
1. Added Code 49, Code 16K, GM Code, Code One and OCR-B features in
Chapter 6.
2. Added Aiming Mode, Pulse Mode, Trigger Mode in
“Scan Mode” in
Chapter 3.
3. Modified
“Timeout between Decodes (Same Barcode)” defalut setting.
4. Deleted Chapter 3
” Good Read Beep Volume” Feature.
5. Added Transmit Not Good Read Message in Chapter 3.
6. Added Read Barcode On/Off in Chapter 3.
7. Added Febraban in
“Interleaved 2 of 5” in Chapter 6.
8. Added Wide Adaptive Mode in
“Scanning Preference” in Chapter 3.
9. Added Decode Area in Chapter 3.
10. Updated the ID Settings Code to Special 2D DM Settings Code.
11. Modified Chapter 2 EasySetEX.
July 16, 2019
V1.1.2 1.Deleted the HR42-SR picture in the first page. January 17, 2020