Newland NLS-HR42 User Manual Download Page 210

Page: 210 / 265

196

Enable/Disable Data Formatter

When Data Formatter is disabled, the barcode data is outputted to the host as read, including prefixes and suffixes.

@DFMENA0

** Disable Data Formatter

You may wish to require the data to conform to a data format you have created. The following settings can be applied to

your data format:

Enable Data Formatter, Required, Keep Prefix/Suffix:

Scanned data that meets your data format requirements is

modified accordingly and gets outputted along with prefixes and suffixes (if prefix and suffix are enabled). Any data that

does not match your data format requirements generates an error beep (if Non-Match Error Beep is turned ON) and the

data in that barcode is not transmitted.

Enable Data Formatter, Required, Drop Prefix/Suffix:

Scanned data that meets your data format requirements is

modified accordingly and gets outputted without prefixes and suffixes (even if prefix and suffix are enabled). Any data that

does not match your data format requirements generates an error beep (if Non-Match Error Beep is turned ON) and the

data in that barcode is not transmitted.

Enable Data Formatter, Not Required, Keep Prefix/Suffix:

Scanned data that meets your data format requirements is

modified accordingly and gets outputted along with prefixes and suffixes (if prefix and suffix are enabled). Barcode data

that does not match your data format requirements is transmitted as read along with prefixes and suffixes (if prefix and

suffix are enabled).

Enable Data Formatter, Not Required, Drop Prefix/Suffix:

Scanned data that meets your data format requirements is

modified accordingly and gets outputted without prefixes and suffixes (even if prefix and suffix are enabled). Barcode data

that does not match your data format requirements is transmitted as read along with prefixes and suffixes (if prefix and

suffix are enabled).

Summary of Contents for NLS-HR42










































































































































































































































































Search results

Summary of Contents for NLS-HR42

Reviews:

Related manuals for NLS-HR42

Brands by name

Popular brands

Newland NLS-HR42, User Manual

Search results

Summary of Contents for NLS-HR42

Reviews:

Related manuals for NLS-HR42

Brands by name

Popular brands