Newland NLS-HR42, User Manual

Page: 125 / 265

111
Set Length Range for Code 39
The scanner can be configured to only decode Code 39 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
@C39MIN
Set the Minimum Length (Default: 1)
@C39MAX
Set the Maximum Length (Default: 48)
If minimum length is set to be greater than maximum length, the scanner only decodes Code 39 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only Code 39
barcodes with that length are to be decoded.
Set the scanner to decode Code 39 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2.
Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
3. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.
4. Scan the Set the Maximum Length barcode.
5.
Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section in Appendix.
6. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.