Newland NLS-HR42, User Manual

Page: 153 / 265

139
Check Character Verification
A check character is optional for Standard 25 and can be added as the last character. It is a calculated value used to verify
the integrity of the data.

Disable: The scanner transmits Standard 25 barcodes as is.

Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Standard 25 barcodes
to verify that the data complies with the check character algorithm. Barcodes passing the check will be transmitted
except the last digit, whereas those failing it will not be transmitted.

Transmit Check Character After Verification: The scanner checks the integrity of all Standard 25 barcodes to verify
that the data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas
those failing it will not be transmitted.
@S25CHK0
** Disable
@S25CHK1
Do Not Transmit Check Character After Verification
@S25CHK2
Transmit Check Character After Verification
If the Do Not Transmit Check Character After Verification option is enabled, Standard 25 barcodes
with a length that is less than the configured minimum length after having the check character excluded
will not be decoded. (For example, when the Do Not Transmit Check Character After Verification
option is enabled and the minimum length is set to 4, Standard 25 barcodes with a total length of 4
characters including the check character cannot be read.)