Newland NLS-HR42, User Manual

Page: 140 / 265

126
Set Length Range for UCC/EAN-128
The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
@GS1MIN
Set the Minimum Length (Default: 1)
@GS1MAX
Set the Maximum Length (Default: 48)
If minimum length is set to be greater than maximum length, the scanner only decodes UCC/EAN-128
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only UCC/EAN-128 barcodes with that length are to be decoded.
Set the scanner to decode UCC/EAN-128 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2.
Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
3. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.
4. Scan the Set the Maximum Length barcode.
5.
Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section in Appendix.
6. Scan the Save barcode from
the “Save/Cancel Barcodes” section in Appendix.