Newland NLS-HR42 User Manual Download Page 91

Page: 91 / 265

Add-On Code Required

When

EAN-8 Add-On Code Required

is selected, the scanner will only read EAN-8 barcodes that contain add-on codes.

@EA8REQ1

EAN-8 Add-On Code Required

@EA8REQ0

** EAN-8 Add-On Code Not Required

Add-On Code Separator

When this feature is on, there is a space between the data from the barcode and the data from the add-on code. When

turned off, there is no space.

@EA8SEP0

** Off

@EA8SEP1

Convert EAN-8 to EAN-13

Convert EAN-8 to EAN-13:

Convert EAN-8 decoded data to EAN-13 format before transmission. After conversion, the

data follows EAN-13 format and is affected by EAN-13 programming selections (e.g., Check Character).

Do Not Convert EAN-8 to EAN-13:

EAN-8 decoded data is transmitted as EAN-8 data, without conversion.

@EA8EXP0

** Do Not Convert EAN-8 to EAN-13

@EA8EXP1

Convert EAN-8 to EAN-13

Summary of Contents for NLS-HR42










































































































































































































































































Search results

Summary of Contents for NLS-HR42

Reviews:

Related manuals for NLS-HR42

Brands by name

Popular brands

Newland NLS-HR42, User Manual

Search results

Summary of Contents for NLS-HR42

Reviews:

Related manuals for NLS-HR42

Brands by name

Popular brands