New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual

Page: 13 / 268

- 12 -
www.NewLeader.com
(800) 363-1771
317314-C
Raven OMNiPOWER NL5000 G5
HANDLE HAZARDOUS MATERIALS SAFELY
Figure 1�5 - Materials to spread can be dangerous�
Improper selection, application, use or handling may be a hazard to
persons, animals, plants, crops or other property�
A Safety Data Sheet (SDS) provides specific details on chemical
products: physical and health hazards, safety procedures and
emergency response techniques�
Check all SDS’s before starting any job using a hazardous material�
Follow all instructions and precautions given by the material
manufacturer�
Figure 1�5
WORK IN WELL-VENTILATED AREAS
Never run machine engine inside a building unless
adequate ventilation is provided to safely and
properly remove exhaust fumes. Failure to comply
with this requirement could result in death or serious
injury�
Figure 1�6 - Always work in a properly ventilated area�
Engine exhaust fumes can cause sickness or death. If it is necessary
to run an engine in an enclosed area, use proper equipment to safely
remove exhaust fumes from the working area.
Open building doors and get fresh air into the working area whenever
possible�
Figure 1�6
PROTECT AGAINST NOISE
Figure 1.7 - Long periods of exposure to high decibels or loud noise
can cause hearing impairment or loss�
Wear proper hearing protection such as earmuffs or earplugs during
periods of exposure to high decibels or loud noise.
Figure 1�7
Operations
General Safety Rules