New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual

Page: 56 / 268

- 53 -
Raven OMNiPOWER NL5000 G5
www.NewLeader.com
(800) 363-1771
317314-C
Bin 1: Main holding bin for material or Insert. Optional MultApplier insert would be configured as Bin 2.
Conveyor: Conveys material to rear of unit�
Conveyor Chain Oiler: Use to lubricate conveyor chain strands at the end of each day’s use to prevent
premature component failure�
Cylinder Control Valve Assembly: Contains control valves for all feedgate control cylinders, and spinner
shift cylinders�
Enclosure: Houses spreader control modules and fuse panel�
Feedgate: Adjustable gate mounted into Rear Endgate. Allows for variable rates of material flow by
moving hydraulic actuator to desired height�
Hillside Divider: Ensures balanced flow of material across conveyor when on hillsides or uneven terrain.
Inverted “V”: Mounted inside Main Hopper when Insert not installed� Distributes weight pressure
across conveyor, allowing for consistent material flow to Feedgate, and promotes an improved blend
when spreading fertilizer�
Lift Hooks: Used to lift unit or insert with appropriately rated lifting device�
Material Divider: Ensures uniform spread pattern by directing material off of conveyor onto spinner discs�
Material Divider Back Plate Storage: Storage position for material divider back plate when removed for
spreading lime�
Rear Endgate: Bolt-in endgate furthest from chassis cab (Rear based on direction of travel)� Holds
mounted Feedgate, allowing for rear release of material from bin�
Side Stake: Side support for machine walls�
Sub-Frame: Designed specifically to work with Raven OMNiPOWER. Comes with folding support legs for
when not in use�
Sill: Base of Main Hopper side walls� Contains Conveyor and supports machine walls�
Spinner Assembly: Contains adjustable G4 Spreader system, consisting of hydraulic spinners used
for dispersal of various materials at different positioned settings allowing for consistent, even spread
patterns across a wide variety of material with a high rate of accuracy�
Spinner Deflectors: Deflect material away from machine.
Spinner Guards: Upper and Lower guards, protects operators from spinner discs� Must be in place
during any operation�
Spreader Control Valve Assembly: Contains control valves for Bin 1 conveyor, spinners and automatic
conveyor tension�
Vane Assembly: Precisely directs material from conveyor to spinner(s) as spinner assembly shifts left or
right�
Introduction