New Leader Raven OMNiPOWER NL5000 G5 Operator'S Manual Download Page 106

Page: 106 / 268

- 100 -

www.NewLeader.com

(800) 363-1771

317314-C

Raven OMNiPOWER NL5000 G5

Material Profile Management

For every material to be spread, at every unique rate, a material profile must be configured. On the

Home Screen, press

to manage profiles.

NOTE:

Spread pattern testing is required when creating a new profile or if modifying an existing profile.

A spread pattern test kit is available for this purpose� See “Spread Pattern” section of manual for

details�

• Press

to continue�

• Select Swath Module tab at bottom of the screen�

•

This screen shows where profiles are stored Up to

25 different profiles may be saved.

• Press

to create a new profile (A).

• Press

to edit an existing profile (B).

• Press

to delete an existing profile (C).

• Press the dropdown arrow (D) to select a saved

profile.

Controller Operations

Summary of Contents for Raven OMNiPOWER NL5000 G5













































































































































































































































































Search results

Summary of Contents for Raven OMNiPOWER NL5000 G5

Reviews:

Related manuals for Raven OMNiPOWER NL5000 G5

Brands by name

Popular brands

New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual

Search results

Summary of Contents for Raven OMNiPOWER NL5000 G5

Reviews:

Related manuals for Raven OMNiPOWER NL5000 G5

Brands by name

Popular brands