New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual

Page: 71 / 268

- 67 -
Raven OMNiPOWER NL5000 G5
www.NewLeader.com
(800) 363-1771
317314-C
Lubrication & Maintenance
Spinner Fins
Visually inspect spinner fins daily for build-
up of material and wear� Spinner discs and
fins must be kept clean and polished. Even
a small build-up of material on a spinner can
significantly affect the spread pattern. Rough,
bent or worn fins will produce poor spread
patterns. Replace worn fins and discs as
needed� See Fin Kit Installation Instructions for
replacement part numbers and instructions�
Spinner Deflectors
Visually inspect spinner deflectors daily for
build-up of material and damage� Clean as
needed� Even a small build-up of material on a
spinner deflector can affect the spread pattern.
If damaged, bent or otherwise, replace� See
parts manual for replacement part numbers�
Hillside & Material Dividers
Visually inspect material divider and hillside
dividers (as equipped) daily for build-up of
material and wear� Any build-up of material on
divider components can affect performance�
Clean as needed� Replace worn or damaged
parts as necessary� See parts manual for
replacement part numbers�
Figure 5 - Fin
Figure 6 - Spinner Deflector
Figure 7 - Hillside & Material Dividers
Figure 8 - Vane Assembly
Vane Assembly
Visually inspect vane assembly for buildup of
material and wear� Ensure all vanes are free
of buildup and swing freely� Clean vanes and
remove blockages as necessary� See parts
manual for replacement parts�