New Leader Raven OMNiPOWER NL5000 G5, Operator'S Manual

Page: 74 / 268

- 70 -
www.NewLeader.com
(800) 363-1771
317314-C
Raven OMNiPOWER NL5000 G5
Lubrication Chart
Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation� Tag all controls to prohibit operation� Failure to comply with the
above warning could result in death or serious injury�
The spreader should be regularly lubricated with the lubricants recommended in this manual in accordance
with the following chart:
Location Places Method Frequency
Conveyor
Idler Bearings (1, 2 - Front Bank) 2
Grease Gun Weekly
Driveshaft Bearings (5, 6 - Rear
Bank)
2
Conveyor Chain Strands 1 Oil Mixture Daily, After first 10 hours spreading
Gearcase 1 Gear Oil Check Monthly; Change Annually
Bin 2 Insert Conveyor
Idler Bearings (1, 3 - Rear Bank) 2
Grease Gun Weekly
Driveshaft Bearings (2, 4 - Rear
Bank)
2
Idler Take -Up Screws 2 Hand Grease Annually
Conveyor Chain Strands 2 Spray Lubricant Annually
NOTE: Unusual conditions, such as excessive dust, temperature extremes or excessive moisture may require
more frequent lubrication of specific parts.
*See “Lubricant and Hydraulic Oil Specifications” for types of lubricants and oil to be used.
Figure 1 - Grease Banks
Figure 2 - Rear Grease Bank Decal
FRONT BANK
REAR BANK